modname=ckeditor
Board size: 5.2*6.2cm
If Your switch is the same as mine, if it’s not broken, you don’t need to buy it
The high-power brushless electric wrench/electric hammer/percussion drill/driver/electric gun/angle grinder control board can be universally used in various brands of machines.
Both with and without Hall motors can be used universally, as long as three motor phase wires are connected (regardless of the wire sequence), the Hall wires do not need to be connected.
By default, the electric hammer board has no gears and no gear lights.
The 8-wire speed control switch with light has two sizes, large and small, as shown in the figure below (if used for the Makita machine, the shell must be modified to fit the small switch, and it is not acceptable to return the product on the grounds that the switch size is not suitable).
Please connect the wires as shown in the figure.Before testing the machine, install the shell first, and the machine head can be easily rotated before being energized.Reverse power supply may cause burning.
Nadinho12
2021-07-04 5/5 |
Thank you very much. |