Notes
1. Ensure that the voltage the lamp receives is never greater than 12V.
2. And make sure you connect DC12V to our lamp, not AC12V.
3. Buyer needs to buy dimmer separately.
If buyer doesn't have dimmer, the lamp also can illuminate after connecting DC12V transformer, but it can't be dimmable, because no dimmer.
Parameters
Input voltage: DC12V
Light source: 1 piece of COB LED MR16 Spotlight
Watt versions: 7W
Lamp body material: Plastic
Lamp dimension: D94xD58xL110mm
Embedded part dimension: D74xH115mm
Lamp waterproof grade: IP68(can be put into water directly).
Dimmable: Yes( but it doesn't include dimmer)
Length of power cable: 1 meter
Life Span: 50000 hours
Color versions: Warm White 3000K, Daylight white 4000K
Knowledge
It can be used for concrete pool, fiberglass pool.
Installation for concrete pool
1. Open a suitable size hole on pool wall as embedded part.
2. Make inside of hole waterproof in case water leaks outside from concrete wall.
3. Get main power cable through embedded part.
4. Insert embedded part in the hole, and fill cement between wall.
5. Connect main power to the lamp and make the connector waterproof.
6. Switch lamp into embedded part.
Installation for fiberglass pool
1. Open a hole on fiberglass pool.
2. Install the lamp go through the wall, and keep one waterproof rubber inside of lamp.
3. Put other waterproof rubber ring at the back side of lamp, and fix screw tight.
Jasson741
2021-06-20 5/5 |
Ok |
Futredntst
2021-06-10 4/5 |
Conform to description attention no transformer 220/12v |
Swhitehe
2021-06-03 5/5 |
looks good - fast delivery |
Meharmeer
2021-04-29 5/5 |
qualité du Produit qui correspond à la description |
Tiy My Shu Plz
2021-05-17 5/5 |
Super bien! |